Concrete
Ideal for lightweight, commercial and domestic projects including shed bases, garden wall foundations, Ground foundations, and kerbing. S1 (10 – 40 mm) slump, S2 (50–90mm) slump, S3 (100-150mm) slump available.
Ideal for lightweight, commercial and domestic projects including shed bases, garden wall foundations, ground foundations, and kerbing. S1 (10–40mm) slump, S2 (50–90mm) slump, and S3 (100–150mm) slump available.
Ideal for reinforced house foundations, foundations for retaining walls, driveways and garage floor slabs. S1 (10–40mm) slump, S2 (50–90mm) slump, and S3 (100–150mm) slump available.
Ideally used for agriculture and industrial buildings that require additional reinforced strength. S1 (10–40mm) slump and S2 (50–90mm) slump available.
Ideal for house floors where a non – permanent finish will be applied. S1 (10–40mm) slump and S2 (50–90mm) slump available.
Typically used for Domestic floors and bases with lighter overall loads including shed bases. S1 (10–40mm) slump and S2 (50–90mm) slump available.
Ideal for kerb bedding, haunching, unreinforced foundations, and blinding. Suitable for general domestic and commercial use where moderate strength and workability are required. S1 (10–40mm) slump and S2 (50–90mm) slump available.
Ideal for domestic foundations, drainage works, and utility reinstatement. Commonly used where moderate strength and durability are required for trench fill, mass fill, and general groundworks. S1 (10–40mm) slump and S2 (50–90mm) slump available.
Ideal for structural foundations, roadworks, drainage installations, and utility reinstatement. Suitable for use where high strength and durability are required in demanding groundworks. S1 (10–40mm) slump and S2 (50–90mm) slump available.
Mortar & Screed
Mortar to M10 grade. 48-72 hour retarders available.
Mortar to M2 grade. 48-72 hour retarders available.
Mortar to M2.5 grade. 48-72 hour retarders available.
Mortar to M5 grade. 48-72 hour retarders available.
Mortar to M12 grade. 24-72 hour retarders available.
Mortar to M6 grade (approx). 24-72 hour retarders available.
Mortar to M6 grade. 48 to 72 hour retarders available.
Mortar to M4 grade (approx). 24 to 72 hour retarders available.
Mortar to M4 grade. 24 to 72 hour retarders available.
Mortar to M4 grade (Approx). 24 to 72 hour retarders available.
Used primarily for backfill, leveling over insulation boards, or non-structural floor layers.
High-strength screed mix ideal for heavy-duty flooring or industrial use where durability and load resistance are essential.
Commonly used for commercial floors or areas subject to heavier foot traffic and moderate loading.
ideal for finishing floors where a smooth finish is required. Typically used for all general household purposes.
Semi-dry version of the 1:4 mix, ideal for hand-trowelled finishes and areas where a smooth, even surface is needed. Used in domestic and commercial settings.
Dry mix often used in underfloor heating or time-sensitive floor laying. Requires good compaction.
Moderate-strength screed for light-use internal floors or as a base layer under tiles or finishes. Offers a balance of workability and economy.
Low-strength screed suitable for non-structural fills, leveling layers, or lightweight applications with minimal load.
Concrete
Mortar
Screed
Lean and low strength semi-dry con-crete. Ideal for projects where strength isn’t a key factor such as drainage works.
Ideal for house floors where a non –permanent finish will be applied.
Typically used for Domestic floors and bases with lighter overall loads includ-ing shed bases.
Ideal for lightweight, commercial and domestic projects including shed bases, garden wall foundations, Ground foun-dations, and kerbing.
Semi-dry concrete ideal for paving external kennels and reinforced hard standings.
Ideal for reinforced house foundations, foundations for retaining walls, drive-ways and garage floor slabs.
Ideally used for agriculture and industrial buildings that require additional reinforced strength.
Has enhanced workability Ideally used for bedding materials such as flags, kerbing, and paving. Uses 10mm coarse aggregate.
Typically used for stronger more durable cases such as foundations or roadwork. Uses 20mm coarse aggregate.
20/10mm aggregate coated in a cement slurry with no fine aggregate (sand). It pos-sesses good drainage properties due to its open texture.
Kerb concrete mix. Slightly less water.
Mortar to M4 grade w Air Entrainer (AEA). Available w Retarder.
Mortar to M6 grade w Air Entrainer (AEA). Available w Retarder.
Mortar to M12 grade w Air Entrainer (AEA). Available w retarder.
A lower cost mortar using our own recycled grit sand. Ideal for laying flags, patios & other general landscaping purposes.
Available for purchase!
Screed mix suitable for patios, pavers, and other general and landscaping purposes.
Screed mix ideal for finishing floors where a smooth finish is required.
Typically used for all general household purposes.
Screed mix suitable for patios, pavers, and other general and landscaping purposes.
Screed mix ideal for finishing floors where a smooth finish is required.
Typically used for all general household purposes.
East Central Scotland - Fife
